Please refer to our release note for the latest information about the Windows and Macintosh edition.
Note) When necessary, the contents of Windows and Macintosh edition's System requirements and/or "Supported cameras" will be changed without a previous notice.
You do not have to be connected to the Internet if you are using the "FREE MODE" or trial "PRODUCT MODE".
However, you will have to register your license if you would like to use the "PRODUCT MODE". You cannot register off-line. After completing the registration you do not have to be connected to the Internet to use the software.
You might not be able to download the file from the Internet due to your security and browser settings on your OS.
Please let us know if you are using a firewall and an anti-virus software.
If you are using them please let us know the name and version of them. Please complete the details of our questions on our technical support form.
If you do not want to receive our newsletter and you do not input your "email address" nor "Your name" in the box, this message will display.
If you do not want to input your email and name in the box, please click and remove the check mark in the "If you hope to receive SILKYPIX newsletter, please check this," box.
This problem happens when using Internet Explorer.
If this happens, please do the following operation.
1.Click to select the "index.cgi" icon on your desktop.
2.On the menu list, click the "File" and choose "Get info" from the drop down list.
3.The "index.cgi info" dialog will display.
Click to select the "Name & Extension:" in the "Get info" dialog, and then change the "index.cgi" to "SILKYPIX.tar.gz".
4.Close the "index.cgi info" dialog.
5.Double-click the "SILKYPIX.tar.gz" icon.
This will extract the "SILKYPIX2.X.X.X.en.pkg".
*If the "SILKYPIX.tar.gz" doesn't extract "SILKYPIX2.X.X.X.en.pkg" automatically, please manually extracts it.
6.Double-click the "SILKYPIX2.X.X.X.en.pkg" icon.
The "Install SILKYPIX Developer Studio 2.0 for Macintosh" dialog will display.
Moreover, this problem doesn't occur with Safari.
When you cannot do extract by the above operation, please try to download this program with Safari.
There is no time limit to register your product key. Therefore, you can register your product key any time. Please keep a copy of your product key in a safe place, because we will not reissue a new product key if you lose your original.
About [SILKYPIX Developer Studio] when you are registering your product key you have to be connected to the Internet. You cannot register your product key offline.
When you use SILKYPIX after registration is completed, it is not necessary to connect to the Internet.
There is a possibility that the version that you are using is old.
Please go to our download page and download the latest program and then please try again.
There is a possibility that is caused by your anti-virus software If this occurs, please disable your security software and then start the application again.
There is a possibility that the downloaded file is corrupted or the system requirements are not suitable for this application.
First, please go to System requirements and confirm your system.
Next, please go to our download page and download the latest program and then please try again.
If you are using SILKYPIX before version 2.0.17.1, there is a possibility that the file may disappear.
Also, if you save a Raw file as a JPEG/TIFF file with more than 32 characters, that file might disappear like the example above.
1. When SILKYPIX reads the RAW file that the number of the name is over 32 characters include the extension and ". (dot) ".
2. When SILKYPIX reads the RAW file that was copied on the Finder
3. When SILKYPIX reads the RAW file that was used " / ( slash ) " in the name
4. When SILKYPIX save the RAW file to JPEG/TIFF file that " / (slash) " and ":(colon)" was used the name
* In case of 2. and 4, the file will always disappear.
Furthermore, we have placed a measure to the latest version (after Ver.2.0.18.1).
It is impossible read the RAW file and save to the JPEG/TIFF file in this measure.
1. Please confirm the formatted file that you had selected.
When you use SILKYPIX, you can open up TIFF/JPEG and RAW data files.
However, it is not possible to readjust TIFF/JPEG files except for RAW data files.
2. When you try to select multiple images, please try to select only one image.
* To make the same adjustments to multiple images, first, set the parameter to the first image.
Next, copy the parameter and past it to the other images.
Please refer to our software manual ("7.5 Setting Development Parameter to Multiple Scenes" and "7.6 Operating Multiple Selected Scenes") for more details.
The image file that you have chosen can not be adjust a parameter when JPEG or TIFF and more than one image is chosen.
However, when the chosen image file is one sheet of RAW files, there is possibility that the setting file wasn't installed properly or setting file was damaged.
Please do the following below:
1. Start up the"Initialize user configuration file" in the "Trouble shooting" in the "Help (H)" menu and click "yes (Y)".
2.The application will automatically quit and return to the setting after installation.
3.Then,please test "SILKYPIX" again.
If the problem can not be resolved even if you have done everything that was said above, then there is a possibility that the setting file was damaged.
Please go to our download page and download the latest program.
You cannot copy and paste only parts of the parameters to the other images.
However, you can select an item among the copied parameters and paste it to the other images.
Please refer to our software manual ("7.5 Setting Development Parameter to Multiple Scenes" and "7.6 Operating Multiple Selected Scenes") for more detail.
*The items that can be set by "Partial paste development parameter" dialog is as follows.
1) Exposure bias
2) NR(Noise Reduction)
3) WB(White Balance)
4) Sharpness
5) Tone
6) Tone curve
7) Saturation
8) Hightlight control
9) Lens correction
10) Rotation/Digital shift
11) Fine color control
12) Colorspace
13) Color mode
14) Development precision
To use AdobeRGB under the ICC profile, you need to save the developed images.
First of all, please set the colorspace in the SILKYPIX.
Next please make "Enable recording" in "ICC profile" effective by "Setting for developed image" and execute save the developed images.
Please refer to our software manual ("4.7.3 Selecting Colorspace" and "9.1.5 Specifying Colorspace at Development" in the "9.1 Setting for Developed Image") for more detail.
Note) The colorspace setting cannot be used in the FREE MODE.
If you would like to use the colorspace setting, please use the PRODUCT MODE trial. You will have 14 days to review and test all the functions. Please acknowledge this before using.
The setting of "Color space" cannot be fixed to AdobeRGB by default.
Therefore, please copy the parameter in the image after first setting the "Color space" to one image. And, please put the copied parameter on the following images by "Partial paste development parameter".
Please refer to the software manual "4.7.3 Selecting Colorspace" and "Operation to 7.6 Operating Multiple Selected Scenes" for more details.
If you are using a version before 2.0.12/2.0.12 then you might have some problems.
Please check to see if you are using version 2.0.13.3/2.0.13.1 or download the latest program from our download page.
We are sorry for the inconvenience.
1. About the use of the "/(slash)"
In SILKYPIX, when the "/" is attached to the folder name and the file name, this means that it wasn't developed correctly.
Therefore, when you use the "/" for the folder name and the file name, please do not use the "/", and develop again.
2.About the setting of the access limitation to the folder:
Regarding your questions, there is a possibility the folder that saves the file after it develops is a read-only file.
About the setting of the access limitation to the folder, it is possible to lock the "Get info". For more information please refer to the "Ownership & Permissions".
The folder where the RAW data is saved, please confirm the setting of the lock from "Get info" from the contents menu.
We do not guarantee normal operation of this software with the OS, which is not described in the system requirements.
Regarding the system requirements, refer to System requirements on a web site.
This difference occurs because the JPEG file recorded simultaneously is the picture, which has been developed according to the development settings of a camera, and this setting is different from that of this software.
"SILKYPIX" is recording all EXIF information basically by the taking-over.
However, the information which isn't contained in the EXIF information cannot be taken over.
Even if that information is contained in the EXIF information, in case of the unique information (the Maker Note) of
the manufacturer, the information cannot be taken over.
After we review the data, the color and the operation of the camera, "SILKYPIX Developer Studio 2.0" guides as the supported cameras.
Any digital camera that is not on the support list will be considered un-compatible.
We cannot guarantee the functionality of our software for any cameras that are not on our support list.
Unfortunately, when you are developing multiple files you cannot change their file names.
You will have to change them during the batch processing before or after executing the developing process.
Refer to "7.5 Rename/Batch Rename."
Note) Once you change the original file name you will not be able to revert back to it.
The item which you pointed out isn't doing a standard in EXIF.
This information cannot be saved in SILKYPIX because of the unique information ( the MakerNote ) from the manufacturer.
* the MakerNote is non-public-information.
Please understand our position.
Regarding the use of SILKYPIX, you connect to our server and register your product key, and then your registration is completed.
"Error 2500" occurs because there is a problem in the transmission.
* Please refer to the software manual "12.6.1 Error dialog list" in the "12.6 Troubleshooting the product key" for more details.
In this case, to use SILKYPIX, temporarily change the setting of your security software and try to register your product key again.
* The details of the setting change of your security software, please inquire the Support Center of your security software.
Moreover, please go to our home page and try to register your product key with the browser page opened.
However, when the problem cannot be solved even if you do the above operation, please contact us about the following matters.
1. What is the name and version of the security software that you are using?
2. Please let us know your present proxy, firewall settings and etc?
3. What is the name and version of the browser that you are using?
4. Please try to the following operation and contact us about the result.
1) Start up "Test registration" of "Trouble shooting" in "Help (H)" menu.
2) "Test registration" dialog is displayed.
To use SILKYPIX, temporarily change the setting of your security software, please click a [TEST] button.
3) Please inform of all sentences that are displayed in the status column.
If you are using a version 2.0.18.0 then you might have this problems.
Please download the latest program from our download page.
We are sorry for the inconvenience.
If you are using a version 2.0.18.0 then you might have this problems.
Please download the latest program from our download page.
We are sorry for the inconvenience.
SILKYPIX sets the upper limit when registering the product key.
If you cannot register the product key, please send us the following information and contact our technical support center at our support form.
* The error message number
* Your serial number
If you have used a software to clean the registry, the registered information was cleared, and you will have to register again.
When using this software repeatedly, the above error will occur.
In SILKYPIX, there are two method of operating the "Batch development for reserved scene" and the "Batch development for selected scene".
Please follow the directions below:
- About the "Batch development for reserved scene"
* As for this operation, SILKYPIX develops the images that have the "Batch development mark".
1. Put a "Batch development mark" on the images that you want to develop.
2. Start the "Batch development" dialog by doing one of the following operations.
1) Click the "Batch development for reserved scene" in the " Development" on the menu.
2) Click the "Batch development for reserved scene" in the " File" on the menu.
3) Click the [Batch development] button.
3. Set each item in the "Batch development" dialog, and click the [Execute] button.
- About the "Batch development for selected scene"
*As for this operation, SILKYPIX develop the images that you have selected from the thumbnail mode.
1. Select all the developed images that you want to develop.
2. Start the "Batch development" dialog by doing one of the following operations.
1) Click the "Batch development for selected scene" in the " Development" on the menu.
2) Click the "Batch development for selected scene" in the " File" on the menu.
3. Set each item in the "Batch development" dialog, and click the [Execute] button.
Furthermore, please refer to software manual "5.2 collective developing" about the details of the "Batch development". Also, refer to software manual "3.1 marks" about the details of a mark including the "Batch development mark".
First, adjust exposure and color temperature.
Then, adjust the sharp and noise reduction which will enlarge the display magnification of the image from 100 to 1600%.
The high frequency noise is the false color of the pixel unit ( 1, 2 pixels ).
It depends on the influence of the Bayer array largely.
On the other hand, the low frequency noise is the color noise which occurs by dozens of pixel unit.
It depends on the number of pixels of the camera, but it has a red, blue, yellow
mottled pattern.
This occurs when you take a high-sensitivity picture.
This is a setting for a photograph which was taken with low-sensitivity of ISO100-200.
These values are used to remove the noise completely while keeping the sharpness.
Also it is the balkline to be adjustable according to the machinery of the use and the photography condition of the use.
If "SILKYPIX2.X.X.X.en.pkg" file does not extract properly.
Please do the following test.
1.Display the context menu of downloaded "SILKYPIX2.X.X.X.en.pkg".
2.Test the extract from the"BOMArchive Helper" of "Open With " of the context menu.
3.When the extracted, "SILKYPIX2.X.X.X.en.pkg" file is created on the desktop.
Double click "SILKYPIX2.X.X.X.en.pkg" and confirm the start-up of the installer.
We have been receiving a lot of request "to support non-supported digital camera.
However, SILKYPIX can only work with models which has the image pickup device (CCD/CMOS) of the primary color bayer array.
An example of an incompatible camera:
1.The honey array model made by Fuji Photo Film Co., Ltd., (For example: S3Pro, S2Pro and so on).
2.The foveon model made by Sigma Corporation. (For example: SD10, SD9)
3.The model which has CCD and uses the complementary colors system. (For example: Nikon Coolpix5700 and so on)
4.The model which has CCD except for the primary color bayer array. (For example: SONY F828 and so on )
Silkypix Developer Studio is updated as soon as a new digital camera is introduced to the market.
Therefore, by the time a new model is introduced to the market then we will make the necessary revision to support the new digital camera.
Also, sometimes, we will add a new function or correct a problem when we are doing the revisions. In short, we highly recommend using the latest version.
If you are comfortable with your current version then please continue to use it. You will not have any problem using your current version.
We will leave it up to you if would like to use the latest version of SILKYPIX or not.
We recommend downloading the latest version.
(Please refer to the release note that we attached it for each version.)
* Please keep in mind, we cannot support all of the digital cameras that are in the current market due to different model types.
Furthermore, we cannot promise how soon we would be able to support these models.
We hope you could understand our situation.
We are trying to support as soon as possible to the digital camera which is put on the market.
However, we can not promise support for all new digital cameras.
We are not able to support it by the type of models.
Also, we can not promise the time when we start to support these models.
We hope you will understand our situation.
* By the fastest, we supported the digital camera on the publication day.
In former results, in case of the digital camera with massed produce single lens reflex camera type, we support within about 1 week after sale to a lot of models.
Also, we supported within about 1 week after sale to a lot of models.
However, in case of the professional camera and the compact camera, we have the case that support takes time.
The development procedure of SILKYPIX is a high speed processing function.
Because of the heavy processing, it will take some time to process the images.
By using extremely advanced image processing, SILKYPIX can achieve high quality development.
To fully take advantage of the SILKYPIX, your PC should be compatible with the camera that you are using.
*If you feel the performance of your PC is a problem, we recommend using a PC with a high throughput e.g. a dual processor.
Also, if you are using a digital camera that has more than 10,000,000 pixels, we recommend using a PC with more than 1 GB of memory.
SILKYPIX can process the RAW data of a digital camera and create image.
However, it is impossible to set theJPEG/TIFF file parameters or retouch the image.
The read in and the display can be done by the JPEG/TIFF file.
Also, it is possible to do the following operation.
a. Changing Display Magnification during Preview
b. Highlight/Shadow/Outside of the Color Gamut Warnings
c. Histogram (Only in the display, it isn't possible to do operation.)
d. Displaying EXIF Information
e. Outline Preview
f. Rotating Pictures
g. Printing
This is a problem by the set value of the development parameter.
In the default setting of the development parameter of SILKYPIX, the saturation becomes the setting of being high when comparing the developing procedure of genuine product.
Therefore, depending on the photography scene, the over exposure and the under exposure occur more than the development result of genuine product.
If adjusting a development parameter in the following operation, it is possible to perform various developing process, including approaching to the development result of the genuine product.
1.Set to lower the saturation and the exposure bias adjustment value.
2.Set to lower the gamma.
3.Set a tone curve.
4.Change a color mode.
Moreover, the control of the color creation in highlight area can be adjusted with "Highlight controller".
SILKYPIX, uses an advanced speed-up processing so, this software places a heavy load on your PC.
Sometimes when using SILKYPIX and another software at the same time, the other software may not work properly is normal.
This is due to the load that exceeds the throughput of the PC.
"Specific example of problems"
1.It isn't possible to play a DVD.
2.A communication error with the wireless LAN occurred.
3.It isn't possible to use the printer.
When these problems do occur, please do the following to resolve the problem.
1) Add additional memory.
2) Use a PC with a faster processor.
Ex: Use a PC that has a CPU with a higher clock speed.
3)When using SILKYPIX, do not use the other software at the same time.
There is a possibility of a flaw in SILKYPIX or with your PC. SILKYPIX places a heavy load on your PC. When using SILKYPIX and another software at the same time, this error may occur.
From the "Setting for troubleshooting" we provide a setting called "To develop slowly". This setting is used if the above problem occurs. When you place a check mark on this setting and see improvements (for example, the problem is solved or the number of errors occurred has decreased.) there is a possibility that the problem may be your PC.
However, if you do the above procedure and the problem persists then there is a very high possibility that SILKYPIX has a bug.
If this happens, please email us the details of the problem to our technical support at our support form.
We will do our best to resolve the problem.
(If the program has a bug, we cannot guarantee that we will be able to correct the problem.)
[Examples of specific problems with the Windows edition]
1.A Blue-Back (an error message is displayed on a blue screen) occurs.
2.The PC resets itself to protect from overheating or shuts down.
3.An error occurs in Windows.
In conclusion, there could be a problem with your hardware or your CPU is running too hot which might cause problems to your PC. In addition, you may not have enough memory.
It seems impossible to uninstall the program because the INSTALL.LOG file cannot be recognized.
If you would like to uninstall the program, please delete the program manually using the following instructions below.
* By doing this operation, It will delete all the data in the program, the manual, the ICC profile and so on.
However, the record in the registry file in Windows won't be deleted manually.
1) Delete "SILKYPIX Developer Studio 2.0E" folder from the save place of "SILKYPIX Developer Studio 2.0E" and move it to the "Recycle Bin" .
If deleting a folder, please close all windows.
* By the initial setting, it installs in "C:\Program Files\ISL\SILKYPIX Developer Studio 2.0E".
2) Delete the shortcut icon of "SILKYPIX Developer Studio 2.0E" from the desktop and move it to "Recycle Bin".
3) Right-click the [start] button of the Windows and start up "Explorer" from the displayed context menu.
4) Click "Programs" under the "Start Menu".
5) Delete the icon of "SILKYPIX Developer Studio 2.0E" from the list of the window and move it to "Recycle Bin".
If deleting a folder, close all windows.
6) Start up "Add or Remove Programs" from "Control Panel" of the Windows.
7) Choose "SILKYPIX Developer Studio 2.0E" and click [Change/Remove] button.
8) "Error of the deletion" dialog is displayed.
9) Click the [Yes] button and execute deletion.
If you want to delete SILKYPIX Developer Studio 2.0E, please close all windows.
10) Empty the "Recycle Bin" when you completed the above operation.
Regarding your question, you cannot change to the free mode within the trial period.
We hope you will understand this situation.
*After the trial period ended, you start SILKYPIX again, the free mode can choose at that time.
Moreover, the period of the trial PRODUCT MODE is 2 weeks, after you click the "Begin trial" button.
SILKYPIX2.0 buries a developing parameter in the inside of a picture file of the developing result that you developed.
On this account you can take out a parameter at the time of the developing from this file even if you do not record a parameter separately every time.
Please do the following operation;
1. When you develop the RAW file (When you save it in JPEG/TIFF file), please save the Exif information of the file together.
2. Please choose a thumbnail of an RAW file reflecting parameter setting of the JPEG/TIFF file which you stored by using #1.
* When choosing multiple thumbnail, the parameter will reflect in their all of the files.
3. Click the [Dev] tab button and displayed "development " tab screen.
4. Click the [Load param.] button.
5. "Open file " dialog is displayed.
Please select an area to save the JPEG/TIFF file that you had developed by #1. and save it to the "Look in".
6. Please select the "Developed image(*.jpg,*.tif)" to "Files of type".
7. Please choose the JPEG/TIFF file that you had developedit by #1. and click the [Open] button
8. A parameter is reflected to all images of the chosen thumbnail.
Incidentally, please refer to the software manual "7.2 Loading Development Parameter" together for more details about the feature of loading a development parameter.
Before developing, select the "setting for developed image" of the "Development" menu.
Change the "File type" of "setting for developed image" dialog.
Choose the file type which contains EXIF information.
* Please refer to the software manual "9.1.1 Setting File Type" for details of the "File Type".
In case of one scene development, click the "Setting" button
in the "Save as" dialog and change the file type.
In case of batch development, click "Setting" button
in "Batch Development" dialog and change the file type.
You can only starts up the "Trimming" during the preview mode.
Therefore, when you try to use it as a thumbnail mode, please change it to the preview mode to start-up the "Trimming" again.
If you are using a version before 2.0.18.0 then you might have this problem.
When you use version 2.0.19.1 (for Windows) / 2.0.19.2 (for Macintosh) you should not have this problem.
Please download the latest program from our download page.
We are sorry for the inconvenience.
There is a possibility that the setting file wasn't installed properly or the setting file was damaged.
Please do the following test:
Select the [Trouble shooting] in the menu [Help].
And select the "Initialize user configuration file"and click "yes (Y)".
If the application automatically quits and returns to the setting after installation. Please test "SILKYPIX" again.
However, when the problem can not be solved even if you do the above operation, there is a possibility that the setting file was damaged.
Please go to our download page and download the latest program.
If you could not successfully register the product key, please fill in the following questions and email them to our technical support center using the following form; our support form.
1. Please temporary disable the firewall that you are using.
2. Please let us know which Internet provider you are using.
In "SILKYPIX Developer Studio 2.0 SE", when you use the [Add point] button, you can change a tone curve with your setting the "Additional point" from the part for the purpose.
1) Please start the "SILKYPIX Developer Studio 2.0 SE" and the display the image to adjust on the Preview mode.
2) Click to select [Tone curve (T)] command in the menu [View (V)] .
3) The "Tone curve" dialog is displayed. Click to the [Add point] button.
4) Please click the part to want to change the brightness of the image on the preview.
5) The point is added to kind of tone curve that has been selected now.
*At this time, when [Add point] button is clicked while pushing the [CTRL] key with Windows edition, the point is added on all tone curves (RGB, R, G and B).
Also, when [Add point] button is clicked while pushing the [control] key with the Macintosh edition, the point is added on all tone curves (RGB, R, G and B).
6) Drag a point to the upper and lower direction and adjust a tone curve.
7) The setting of the tone curve is reflected in the image.
* Please refer to the software manual "6.2 Tone curve" for details of the "Tone curve".
When you click the [Tool] button, you can direct trim the specification of the area in the image where was displayed with preview mode while you reflect the form which you specified "Specifying method".
For example, when you specified "Free" in the " Specifying method", aspect ratio can appoint a domain in a state without limit freely.
Also, you can appoint a domain from the position that want to start trimming by drag.
Moreover, when you specified "Preset" in the " Specifying method", aspect ratio is fixed, but you can appoint a domain from the position that wants to start trimming by drag.
The above state is "trimming tool mode" that we describe it in our software manual.
However, in this state, it is reflected only during operation of one drag after you click the [Tool] button.
Therefore, if you can not appointed domain by first operation of the drag, please adjust points of the frame (corner of the area or center of vicinity of length and breadth) .
Also, when you click the [Def (Initialize to default)] button, the specified area is released.
If you want to change a specified area greatly, please operate since the [Tool] button again.
SILKYPIX creates a development parameter file (.spd), a parameter file (.spj .spt), and a thumbnail file (.spi) in the folder which has the RAW data.
* Please refer to the software manual "13.3 Files Created Automatically" for more details.
However, you can disable creating these files.
You can specify this setting by the following feature setting.
In this case, the development parameter information, reservation status, rotation information etc. are lost, when the software completes, or a new file/folder is loaded.
* Please refer to the software manual "9.3.5 Enable Saving Parameter/Rotation" in the "9.3 Setting" for more details.
1. The menu [View (V)] - [Fine color controller] displays "Fine color controller" dialog.
2. When you move the operating point of each color of the 8 corner which is on the color circle, you are able to change the specific color of the photograph.
- When you move away from the center of the color circle, the saturation will increase.
- When you move toward the center of the color circle, the saturation will decrease.
- When moving onto the circumference of the color circle, the hue can be changed.
You can also make adjustments using the 3 sliders.
In this case, you can adjust the saturation, hue and brightness.
* Incidentally, when you specify the color on the photograph by using the mouse cursor, the color on the cursor is displayed on the color circle.
Please adjust the operating point, after referring to the position where a pointer was displayed.
Moreover, we recommend using this control after adjusting the white balance, exposure bias and color mode.
(for Windows edition)
Hold down the [CTRL] button while using your mouse to choose the thumbnails.
Right click your mouse and the contextual menu will display.
From the contextual menu, you can specify the user mark for the thumbnails and cancel the setting user mark for the thumbnails.
(for Macintosh edition)
Hold down the [command] button while using your mouse to choose the thumbnails.
Hold down the [control] button while click your mouse and the contextual menu will display.
From the contextual menu, you can specify the user mark for the thumbnails and cancel the setting user mark for the thumbnails.
The data of the developing result can not be saved to CD-R/RW or DVD-R/RW directly.
Please understand this situation.
Therefore, if you would like to copy the data to a CD, please make sure you copy the data to a CD-ROM take came with your PC or CD-ROM player and use the special software that was included with your CD-R/RW or DVD-R/RW player.
* Please contact the PC manufacturer of your PC and the manufacturer of the special software about the details of the above operation.
The specific development parameter can not be directly operated for more than one specific image.
However, "Partial paste development parameter" can be used.
Please refer to our software manual "7.5 Setting Development Parameter to Multiple Scenes" and "7.6 Operating Multiple Selected Scenes" for more detail.
SILKYPIX color space only supports "sRGB" and "Adobe RGB".
In addition, there is no current plan to support the other color space except for "sRGB" and "AdobeRGB".
"SILKYPIX Developer Studio 2.0E" is not compatible with Windows Vista, nor do we have any plans to make it compatible with Windows Vista.
Thank you for understanding.
